![]() ![]() Press F8 (System Write) to save this setting, then press EXIT. You will need to press F8 (OK) to proceed. Cursor to 'USB Mode' and use the Value Dial to set this to 'MIDI.' Use the F1/F2 buttons to select the 'USB' tab on the left side of the screen. ![]() If you are using a later version operating system, you will need to use the second option for connecting to a computer (Connection using a MIDI interface).Ĭonnecting your Fantom-X to a computer using the direct USB connection 1. Note: The last USB drivers released for the Fantom-X series workstations supported Windows 8 and Mac OSX 10.8 (Mountain Lion). Note: if you wish to route the sound (audio) of the Fantom-X into a computer, you will need to use an Audio Interface. The functionality and operation of the Fantom-X and your computer-based application(s) will be the same no matter which type of connection you are using - the only difference is how the MIDI signals are routed. This is useful it you already have a MIDI or Audio/MIDI interface connected to your system, or if there is not a USB driver available for your computer. This will use the MIDI In and MIDI Out ports on the back panel of the Fantom-X, which will connect to the interface, and the interface will then connect to a standard USB port on your computer. This will use a standard USB cable connected to the square 'USB COMPUTER' port on the back of the Fantom-X and then to a standard USB port on your computer. There are two ways to make this connection. The Fantom-X series can be connected to a computer so they can be integrated with music software applications as well as the Roland editor applications. Fantom-X Series USB Driver v1.20 for Mac OS 10.5 and Earlier. Fantom-X6/X7/X8/XR Driver Version 1.0.0 for OS X 10.8. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |